Manual Vacuum Screen Printer
Equipped three pallets and easily screwing two bolts to replace the pallets.
Vacuum Plate Size: 23.6"x17.7"x1.7" (600x450x41mm)
Two High-density Composite Plates Size:
It is used to print on substrates, especially on some thin substrates by its getter device.
1. With all-around micro-adjustment devices and also equipped with lock devices. Micro-adjustment device makes screen and shirt board joint evenly. The up and down micro-device makes it suitable for different substrates; besides, its left and right, back and forth micro-adjustment device ensures the precision of printing. The lock devices can make every part stable and it also ensures the precision of printing.
2. Its high intensity PVC board is waterproofing, cutting and friction resisting, non-deforming, which guarantee a long lifespan;
Its holes on the printing bedplate is 1.0mm (normally 1.5mm) in diameter, 2cm in separation distance, which guarantees more even inhaling and also improve the printing quality;
There are longitudinal and transverse scales on bedplate, which helps place substrates on the right location.
3. The air pump is separated from the main printing equipment, so it can be placed freely, which avoid unsatisfactory printing effects caused by pump shaking. The air pump is equipped with a 2 meters admission pipe (connecting bedplate and air pump) and a 2 meters freeing pipe (connecting pump to outdoor).
Users can adjust the distance between the air pump and the screen printing machine according to the working environment. Putting the end of the freeing pipe to the outdoor can reduce dust affection and air flowing to the substrates caused by air exhausting in the indoor environment.